ATM-HD2 heat insulation cotton automatic attachment accessories machine

实体商品

参数

ATM-HD2 Thermal insulation cotton automatic attachment accessories machine equipment introduction：
1. Automatic feeding of other customers' equipment, compact design, small footprint;
2.The equipment is divided into front and back modules, the front section of the equipment is affixed with thermal insulation cotton front double-sided tape;
At the back end, the equipment is attached with double-sided tape on the back side and the press release paper tearing hand, the pre-tear release paper, the secondary press release paper, automatic feeding;
3.Independent control system for front and rear equipment;
4.The product can be compatible with large size: maximum 250*250mm, minimum 80*80mm;
5.The equipment has two sets of high-precision CCD used to ensure the installation accuracy of double-sided tape, which can achieve ±0.2mm repeated installation accuracy;
6.Optional automatic strapping machine to achieve automatic strapping and packaging, improve the efficiency of manual work, reduce labor.

Head/back Back glue feed:
Description:
This agency is Feida - withdrawal stripping.
Working mode
When the optical fiber on the stripping platform cannot sense the back adhesive, it will give a feedback signal. After receiving the feedback signal, the stepper will drive the coiler forward until the optical fiber senses the label.
Stepper motor stops; Then the servo starts and the stripping is pulled back. By adjusting the position of the optical fiber to match different sizes of material.

ATM-HD2 heat insulation cotton automatic attachment accessories machine technological proces: